Pedal Mod Parts

Opamp Socket

monteallums — Tue, 24 Feb 2026 22:37:57 +0000

Use these Sockets to swap out opamps in pedals. I recommend always using these to allow the opamps to be easily changed.

Hookup Wire — 24 Gauge – Enough for One Switch

monteallums — Tue, 05 Sep 2023 17:13:14 +0000

This enough Hookup wire to assemble one switch with a little left over. This is great DIY wire. Easy to work with and sounds great!

DC Power Jack Mod Kit — Boss-Style

monteallums — Tue, 05 Sep 2023 17:05:42 +0000

This kit will convert your DC Power Jack to the Boss-Style type DC Power Jack. Kit includes DC Power Jack and Easy-to-follow PDF Instructions.

Replacement Knobs — Boss Potentiometer

monteallums — Tue, 05 Sep 2023 16:56:30 +0000

• Diameter (bottom): 20mm
• Diameter (top): 16mm
• Height: 12mm
• Shaft diameter: 6.0mm
• Shaft type: round shaft
• Push-on with screw set

Resistors

monteallums — Tue, 05 Sep 2023 16:37:12 +0000

Carbon Comp resistors are getting hard to find. I will supply the 10k and 100-ohm until my stock is depleted. All values after that will be either Metal Film or Carbon Film Resistors.

Diodes — 1N34A / 1N914 / 4002

monteallums — Tue, 05 Sep 2023 16:13:39 +0000

The 1N34A Germanium Diodes are getting very hard to find. The 1N914 and 4002 and 1N34A Diodes are Great when used as Clipping Diodes. Each will give you a very different type of gain. The Germanium has a very soft fuzz type vibe. The 1N914 has a very hard type vibe. The 4002 has a very soft smooth type vibe. I will also use LEDs as clipping diodes.

Capacitors — Electrolytic

monteallums — Tue, 05 Sep 2023 15:41:50 +0000

The voltage on these will vary from 16V to 35V. These are getting hard to source as many manufacturers are discontinuing production. Luckily I have a good supply on hand and I also have a dependable supplier in Taiwan.

Capacitors — Tantalum

monteallums — Tue, 05 Sep 2023 15:32:23 +0000

The voltage on these will vary from 16V to 35V. Tantalum are used where space is a premium. These are getting hard to source as many manufacturers are discontinuing production. Luckily I have a good supply on hand and I also have a dependable supplier in Taiwan.

Capacitors — Metal Film Stacked

monteallums — Tue, 05 Sep 2023 15:18:24 +0000

The voltage on these will vary from 16V to 35V. Metal Film Capacitors are the best for tolerance and quality. Some of the caps will be the Boxed Form Factor variety. These are getting hard to source as many manufacturers are discontinuing production. Luckily I have a good supply on hand and I also have a dependable supplier in Taiwan.

Switches — DPDT 6-Lug On-On-On Mini Toggle

monteallums — Tue, 05 Sep 2023 15:13:06 +0000

on-on-on 3-Way Switch

I now use these Mini Switches in some of my kits where space is limited. These are smaller than the ones below. Here are the specs: 3/16″ (5mm) mount, body is 5/16″ x 3/16″ (8mm x 5mm).